Industry Information

Update March 25, 2023

Circulating pump refers to the device in the conveying reaction, absorption, separation, absorption liquid regeneration circulating fluid pump. Commonly used single-stage centrifugal pump....

Update March 24, 2023

High temperature control valve selection

High temperature control valve is the working temperature is greater than 450 ℃ valve. Can be divided into 450 ~ 600 ℃, 600 ~ 700 ℃, 750 ℃ three categories. What are the main problems usually...

Update March 23, 2023

Valve electric device classification and selection

Valve electric device (referred to as Denso, the same below) is used to drive the valve opening and closing of a special transmission, the special motor, worm, stroke and torque detection mechanism...

Update March 22, 2023

Pneumatic actuator repair tips

Pneumatic actuator repair tips Pneumatic actuator repair tips I. Overview Pneumatic actuators with oil-free compressed air as the driving force to actuate the valve or baffle action. There are the...

Update March 21, 2023

Valve actuator you choose right?

Because more and more factories use automatic control, manual operation is replaced by mechanical or automation equipment, the executive body is required to act as an interface between the control...

Update March 20, 2023

Control valve characteristics and selection method

Regulating valve is a commonly used actuator in automatic control system, which is used to adjust the flow of controlled object. Correct choice of regulating valve, is to adjust the quality assurance...

Update March 19, 2023

Anti-corrosion valve solenoid valve procurement to consider the necessary technical factors at a glance

Solenoid valve procurement only clear the specifications, types, pressure to meet the procurement requirements of the practice in the current market economy environment is imperfect. Because the...

Update March 18, 2023

With this one, the valve no longer leak leakage

Valve sealing performance requirements, to prevent leakage point of departure. According to the different parts of the leak and the degree of leakage caused by different valves, therefore, need to...

Update March 17, 2023

Copper valve selection precautions

Selection of copper valves: 1. Based on the selection of control functions, all kinds of valves have their own functions, the selection should pay attention to its corresponding function. 2....

Update March 16, 2023

Adjust the valve installation tips brief

What are the points to adjust the valve installation? The correct installation method, can improve the efficiency of the valve, reduce valve wear, the following is the introduction of the regulation...